The specially designed drilling mud hydro-cyclone units are primarily used for removal of sand-size and silt-size particles from returned drilling fluids. Abrasion resistance polyurethane hydro-cyclones are applied to the unit. The unit can be stand alone for use or assembled above shale shaker through pre-designed connectors. The number of desander and desilter cones is customizable according to the real conditions.
10″ drilling mud desander hydrocyclones
Sand size solids removal (40 ~ 100 microns)
100% polyurethane hydrocyclone
500gpm per cone at 75 feet of head
Flexible fast connection is available for user to assemble
Compact design, small footprint
4″ drilling mud desilter hydrocyclones
Silt-sized solids removal (12 ~ 74 microns)
100% polyurethane hydrocyclone
80 gpm per cone at 75 feet of head
Variable size apex inserts
Available with and without a ramp in the feed inlet
Flexible fast connection is available for user to assemble
Compact design, small footprint
Hydrocyclone Unit Configurations
| Model | Capacity(m3/h) | Desander Cone Size(in) | Number of Desander(ea) | Working Pressure(Mpa) | Feeding/Output(in) |
| 1S | 120 | 10 | 1 | 0.25-0.4 | 6 / 8 |
| 2S | 240 | 10 | 2 | 0.25-0.4 | 6 / 8 |
| 3S | 360 | 10 | 3 | 0.25-0.4 | 6 / 8 |
| Model | Capacity(m3/h) | Desilter Cone Size(in) | Number of Desilter(ea) | Working Pressure(Mpa) | Feeding/Output(in) |
| 8N | 120 | 4 | 8 | 0.25-0.4 | 6 / 8 |
| 12N | 240 | 4 | 12 | 0.25-0.4 | 6 / 8 |
| 16N | 360 | 4 | 16 | 0.25-0.4 | 6 / 8 |
| Model | Capacity(m3/h) | Desander Cone Size(in) | Number of Desander(ea) | Desilter Cone Size(in) | Number of Desilter(ea) | Working Pressure(Mpa) | Feeding/Output(in) |
| 1S8N | 120 | 10 | 1 | 4 | 8 | 0.25-0.4 | 6 / 8 |
| 2S12N | 240 | 10 | 2 | 4 | 12 | 0.25-0.4 | 6 / 8 |
| 3S16N | 360 | 10 | 3 | 4 | 16 | 0.25-0.4 | 6 / 8 |